Don’t forget to see our FAQ page for additional information.
****
Here at SinnSound we’ve gone back to basics so that just about every speaker and stereo-system in existence old and new, can be connected & used.
As a SoundBox owner, you don’t need to buy anything new if you own speakers and/or an existing audio system.
Connect to a TV.
Connect 4 speakers of your choice.
Connect to power supply.
Turn on Power switch at the back of the SoundBox.
Touch Power button on front right corner of the SoundBox.
The following is a typical layout for a room.
To ensure vocal content (talking, singing etc) is ‘cantered’ and at the front, we recommend placing front-left and front-right speakers immediately to the left and right of any TV you might be using.
For best results, rear-left and rear-right speakers should be well spaced.
If you want to add a SoundBox to a room in your SONOS connected house
You will need 1 x Sonos Port
Connect the SONOS Port to the SoundBox input using an RCA cable
Connect 4 speakers normally as above
OR
Connect 4 Sonos Era 100, Era 300 or Five speakers using the ‘line-in’ connector on each speaker (use a single RCA cable and a 3.5mm adapter per speaker to connect to the SoundBox)
If you want to add a SoundBox to a room in your DENON connected house
You will need 1 x HEOS Link
Connect the DENON HEOS Link to the SoundBox input using an RCA cable
Connect 4 speakers normally as above
The SoundBox will work with all existing smart speakers on offer globally as long as it has a 3.5mm headphone jack
Simply connect your favourite smart speaker to the SoundBox via the 3.5mm headphone jack, ask it to play your favourite song and, hey-presto, enjoy it in surround sound on your SoundBox
*Not included
